1.3 Electrical Safety
Before connecting cables, ensure that the equipment is intact. Otherwise, electric
shocks or res may occur.
Non-standard and improper operations may result in re or electric shocks.
Prevent foreign matter from entering the equipment during operations. Otherwise,
equipment damage, load power derating, power failure, or personal injury may
occur.
For the equipment that needs to be grounded, install the ground cable rst when
installing the equipment and remove the ground cable last when removing the
equipment.
Do not route cables near the air intake or exhaust vents of the equipment.
Do not directly connect aluminum cables to prevent electrochemical corrosion of
copper and aluminum.
Stay away from the equipment when preparing cables to prevent cable scraps
from entering the equipment. Cable scraps may cause sparks and result in
personal injury and equipment damage.
SmartLi 3.0
User Manual (Short-Term Backup Power) 1 Safety Information
Issue 10 (2024-01-31) Copyright © Huawei Digital Power Technologies Co., Ltd. 12
To Next Page
Loading...
