Figure 5-4 Installing oating nuts
Step 3 (Optional) Install the device to a tray. For details, see the installation guide
delivered with the tray.
Step 4 Mount the USG in the cabinet.
1. Lift the USG and move it to the cabinet.
2. Use a Phillips screwdriver to install M6 screws and
x the USG into the
cabinet through mounting ears, as shown in Figure 5-5.
Figure 5-5 Mounting the USG in a cabinet
HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 514
To Next Page
Loading...
