7.13.2 Canceling Flow Mirroring
Context
Do as follows on the S5700 that is configured with flow mirroring.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
traffic behavior behavior-name
The traffic behavior view is displayed.
Step 3 Run:
undo mirroring
The flow mirroring action is cancelled.
Step 4 Run:
quit
Exit from the traffic behavior view.
Step 5 Run:
interface interface-type interface-number
The interface view is displayed.
Step 6 Run:
undo traffic-policy inbound
The traffic policy and flow mirroring action on the interface are canceled.
To cancel a traffic policy, you must cancel the traffic policy on all the interfaces where the traffic
policy is applied, and then run the undo traffic policy policy-name command to cancel the traffic
policy in the system view.
----End
7.13.3 Checking the Configuration
Run the following commands to check the previous configuration.
Action
Command
Check information about the
observing port.
display observe-port
Check information about port
mirroring.
display port-mirroring
Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management 7 Mirroring
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
91
To Next Page
Loading...
