Huawei V100R006C00 - Checking the CPU Usage; Checking the Memory Usage; Checking Alarms; Checking the Status of an Interface

display power
The status of each power supply is displayed.
----End
4.2.7 Checking the CPU Usage
You can check the CPU utilization statistics and CPU settings.
Procedure
Step 1 Run:
display cpu-usage [ configuration | slave | slot slot-id ]
The CPU utilization statistics and CPU settings are displayed.
----End
4.2.8 Checking the Memory Usage
Context
You can run the following command in any view to check the memory usage of the S5700.
Procedure
Step 1 Run:
display memory-usage [ slave | slot slot-id ]
The memory usage is displayed.
----End
4.2.9 Checking Alarms
Context
You can run the following command in any view to check alarms on the S5700.
Procedure
Step 1 Run:
display alarm urgent [ slot slot-id | time interval ]
The alarms generated during device operation are displayed.
----End
4.2.10 Checking the Status of an Interface
Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management 4 Using display commands to check the status of the device
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
42