Huawei V100R006C00 - Sending Information to the SNMP Agent; Sending Information to the Log Buffer; Sending Information to the Trap Buffer

6.3.3 Sending Information to the SNMP Agent
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center snmp channel { channel-number | channel-name }
Information is sent to the SNMP agent.
Step 3 Run:
snmp-agent
The SNMP agent is enabled.
For details on configuring the SNMP agent, refer to chapter "SNMP Configuration" in the
Configuration Guide - Network Management.
----End
6.3.4 Sending Information to the Log Buffer
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center logbuffer [ channel { channel-number | channel-name } | size
buffersize ]
*
Information is sent to the log buffer.
----End
6.3.5 Sending Information to the Trap Buffer
Context
Do as follows on the S5700.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management 6 Monitoring the Device Through the Information Center
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
59