3 Stacking
About This Chapter
This chapter describes the basic concepts and configuration methods of the stacking function.
3.1 Stacking Overview
This section describes the basic concepts of the stacking function.
3.2 Principle of Stacking
This section describes how a stack system is set up.
3.3 Features of Stacking Supported by the S5700
3.4 Typical Topology of a Stack
This section describes two typical topologies of a stack.
3.5 Configuring the Stacking Function on the S5700
This section describes how to configure the stacking function on the S5700.
3.6 Configuration Examples
This section provides an example for configuring a stack in a ring topology.
Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management 3 Stacking
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
24
To Next Page
Loading...
