If the number of the ACL that matches packets received by the CPU and the observing port are
displayed, the configuration is successful.
7.16 Cancelling CPU Mirroring
This section describes how to cancel CPU mirroring.
7.16.1 Establishing the Configuration Task
Applicable Environment
If packets received by the CPU of the S5700 do not need to be monitored, you can cancel CPU
monitoring.
Pre-configuration Tasks
None.
Data Preparation
To cancel CPU mirroring, you need the following data.
No.
Data
1 Number of the observing port
7.16.2 Cancelling CPU Mirroring
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
undo port-mirroring cpu
CPU mirroring is cancelled.
Step 3 (Optional) Run:
undo observe-port index
The index of the observing port is deleted.
----End
7.16.3 Checking the Configuration
Run the following commands to check the previous configuration.
Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management 7 Mirroring
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
96
To Next Page
Loading...
