7 Mirroring
About This Chapter
The mirroring function is used to monitor packets that meet certain requirements.
7.1 Introduction
This section describes the basics of mirroring.
7.2 Configuring Local Port Mirroring
This section describes how to configure local port mirroring.
7.3 Configuring Remote Port Mirroring
This section describes how to configure remote port mirroring.
7.4 Canceling Port Mirroring
This section describes how to cancel port mirroring.
7.5 Configuring Local VLAN Mirroring
This section describes how to configure local VLAN mirroring.
7.6 Configuring Remote VLAN Mirroring
This section describes how to configure remote VLAN mirroring.
7.7 Canceling VLAN Mirroring
This section describes how to cancel local VLAN mirroring and remote VLAN mirroring.
7.8 Configuring MAC Address-based Local Mirroring
This section describes how to configure local MAC address mirroring.
7.9 Configuring RSPAN Based on MAC Addresses
This section describes how to configure RSPAN based on MAC addresses.
7.10 Canceling Mirroring Based on MAC Addresses
This section describes how to cancel mirroring based on MAC addresses.
7.11 Configuring Local Flow Mirroring
This section describes how to configure local flow mirroring.
7.12 Configuring Remote Flow Mirroring
This section describes how to configure remote flow mirroring.
Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management 7 Mirroring
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
64
To Next Page
Loading...
