English – 21
5.1.4 Wheel hub
Dismantling
Older versions of the wheel hub can occur.
Tools Dimension
Socket wrench 19 mm
Allen Key
6 mm
Torque wrench
Circlip pliers
1. Place a jack assembly under the machine as
illustrated.
2. Raise the machine.
3. Loosen the wheel bolts.
4. Remove the wheel.
5. Remove the SGH clip and washer in the middle
of the wheel hub.
6. Remove the screws on the wheel hub.
NB!
Tighten the wheel bolts alternately to torque
24 Nm.
7. Remove the SGA clip.
8. Dismantle the wheel hub.
9. Check that the key is free from damage.
Replace the key if it is damaged.
Assembling
Assemble in reverse order.
Chassis
To Next Page
Loading...
