Husqvarna P524 - PTO Button; Switch; Socket

English – 47
5.3.9 PTO button
Tools Dimension
Combination wrench 10 mm
Torx T30
Dismantling
1. Remove the side cover.
2. Loosen the PTO button connection from the
circuit board.
3. Loosen the circuit board by dismantling the nut
and move the circuit board aside.
4. Dismantle the securing plate.
5. Put the connector up through the panel.
a
Assembling
Assemble in reverse order.
5.3.10 12V switch
Tools Dimension
Torx T30
Dismantling
1. Remove the side cover.
2. Loosen the switch connection from the circuit
board.
3. Release the switch up through the panel.
Assembling
Assemble in reverse order.
5.3.11 12V socket
Tools Dimension
Torx T30
Dismantling
1. Remove the side cover.
2. Loosen the outlet connection from the circuit
board.
3. Dismantle the nut underneath the panel.
4. Release the outlet up through the panel.
Assembling
Assemble in reverse order.
Electrical system