36 – English
5.2.8 Replacing the engine air lter
Dismantling
1. Raise the engine cover.
2. Loosen the two fasteners holding the lter cover
and remove it.
3. Remove the lter cartridge from the lter
housing.
4. The machine has an extra lter that is tted
inside the lter cartridge. Also remove that lter.
Assembling
1. Assemble in reverse order.
2. Fit the new lter cartridge. Make sure the lter
cartridge is correctly tted over the air intake in
the lter housing.
3. Replace the air lter cover, ensure that the
particle collector is facing downwards.
Propulsion