2 – English
1 Introduction and safety regulations
1.1 General
This Workshop Manual provides a comprehensive
description of how to troubleshoot, repair and test
the ride-on mower. A description of different safety
steps that must be taken during repair work is also
given.
1.2 Safety
Note: The section dealing with safety must be
read and understood by all those carrying out
repair work or service on the ride-on mower.
Warning symbols can be found in this Workshop
Manual and on the ride-on mower. Refer to “1.9
Symbols on the machine” on page 4. A new warning
symbol decal must be applied as soon as possible if
a warning symbol on the machine has been
damaged or is missing so that the greatest level of
safety can be maintained when using the ride-on
mower.
1.3 Target group
This workshop manual is written for personnel with a
general knowledge of repairing and servicing ride-on
mowers.
The Workshop Manual must be read and understood
by personnel who will carry out repair work and
service on the ride-on mower. The Manual is also
suitable for use when training new employees.
Introduction and safety regulations
1.4 Revisions
Any modications to the ride-on mower will be
gradually introduced into ongoing production. As
these modications affect service and/or spare
parts, specic service information will be sent out on
each occasion. This means that in time this
Workshop Manual will become out of date. In order
to prevent this, the manual should be read together
with all service messages concerning the ride-on
mower in question.
1.5 Tools
Special tools are required for some stages. All
service tools are listed in the Workshop Manual.
Usage can be seen in each section. For more
information, refer to Chapter “3 Service tools” on
page 9.
Always use original:
• Spare parts
• Service tools
• Accessories
To Next Page
Loading...
