Husqvarna P524 - Hydraulic Pump

66 – English
2
3
1
WARNING!
Heavy objects are released when
dismantling the hydraulic pump.
Dismantling
1. Remove the driver seat. For more information,
refer to “5.1.2 Driver’s seat” on page 18.
2. Remove the fuel tank. For more information,
refer to “5.4.1 Fuel tank” on page 48.
3. Cut the cable ties on the seat switch.
4. Remove the two cable retainers.
5. Remove the protector plate located under the
seat.
Tools Dimension
Torx T30
Allen Key 6 mm
Combination wrench 8 mm
Combination wrench 10 mm
Combination wrench 13 mm
Combination wrench 22 mm
Combination wrench 32 mm
5.6.9 Hydraulic pump
1. Hydraulic pump 2. Belt pulley 3. Pump belt
Hydraulic system