Hypertherm Powermax65 SYNC Reference Guide

Serial Communication Programmer Reference Guide
48 810400 Reference Guide Powermax65/85/105 SYNC
Read the 16-character UID number for the installed cartridge
To read the unique identification (UID) number for the installed cartridge, the CNC reads the values
in the following registers:
 0x3030 (UID, bytes 0 and 1)
 0x3031 (UID, bytes 2 and 3)
 0x3032 (UID, bytes 4 and 5)
 0x3033 (UID, bytes 6 and 7)
 0x3034 (UID, bytes 8 and 9)
 0x3035 (UID, bytes 10 and 11)
 0x3036 (UID, bytes 12 and 13)
 0x3037 (UID, bytes 14 and 15)
0x3030 – 0x3037 (cartridge UID, bytes 0 – 15)
Description: Reads the hexadecimal value for the 16-character ASCII UID for the installed
cartridge.
Convert the hexadecimal values to ASCII.
A hexadecimal value of 00000000000000000000000000000000 indicates a
cartridge communication failure or radio frequency error.
Encoding or scaling: N/A
Unit: N/A
Function (hex): 04 (Read Registers)

Hypertherm Powermax65 SYNC Specifications

General

Brand	Hypertherm
Model	Powermax65 SYNC
Category	Welding System
Language	English