Hypertherm Powermax65 SYNC Reference Guide

Serial Communication Programmer Reference Guide
Powermax65/85/105 SYNC Reference Guide 810400 45
0x3029 (total number of starts – bytes 3 and 2)
0x302A (cumulative pilot arc time – bytes 1 and 0)
0x302B (cumulative pilot arc time – bytes 3 and 2)
0x302C (total number of arc transfers – bytes 1 and 0)
Description: Reads the hexadecimal value of the high word (bytes 3 and 2) for the total number
of torch starts that the plasma power supply has done in its life.
You will need to interchange the hexadecimal values for 0x3028 and 0x3029, and
then convert the result to decimal.
Encoding or scaling: 32-bit unsigned binary number
Unit: Number
Function (hex): 04 (Read Registers)
Description: Reads the hexadecimal value of the low word (bytes 1 and 0) for the cumulative
pilot arc time in seconds that the plasma power supply has had in its life.
Refer to 0x302B (cumulative pilot arc time – bytes 3 and 2).
Encoding or scaling: 32-bit unsigned binary number
Unit: Seconds
Function (hex): 04 (Read Registers)
Description: Reads the hexadecimal value of the high word (bytes 3 and 2) for the cumulative
pilot arc time in seconds that the plasma power supply has had in its life.
You will need to interchange the hexadecimal values for 0x302A and 0x302B, and
then convert the result to decimal.
Encoding or scaling: 32-bit unsigned binary number
Unit: Seconds
Function (hex): 04 (Read Registers)
Description: Reads the hexadecimal value of the low word (bytes 1 and 0) for the total number
of arc transfers that the plasma power supply has done in its life.
Refer to 0x302D (total number of arc transfers – bytes 3 and 2).
Encoding or scaling: 32-bit unsigned binary number
Unit: Number
Function (hex): 04 (Read Registers)

Hypertherm Powermax65 SYNC Specifications

General

Brand	Hypertherm
Model	Powermax65 SYNC
Category	Welding System
Language	English