Hytera PNC460 - 9 Connectivity; Mobile Network; Enable the Mobile Network; Set the Mobile Network

User Manual
Connectivity
25
9. Connectivity
9.1 Mobile Network
9.1.1 Enable the Mobile Network
Before accessing the cellular network services, ensure that you have properly installed the SIM card. If the cellular
network services are not in use, you can turn it off to decrease data usage and increase battery life.

Method 1
a.
Tap .
b.
Go to
Network & internet
>
Mobile network and SIM card
.
c.
Tap following
Use SIM
.
d.
Tap following
Mobile data
.

Method 2
a.
Swipe down from the status bar.
b.
Swipe down from the control center to unfold it.
c.
(Optional) Swipe left to find
Mobile data.
d.
Tap
Mobile data
.
9.1.2 Set the Mobile Network
1. Tap .
2. Go to
Network & internet
>
Mobile network
.
3. Do any of the following:
If You Want to…
Then…
Enable data roaming
Tap following
Roaming
.
You can access data services when you are outside the service area
of your carrier.
Enable Voice over LTE (VoLTE)
Tap following
VoLTE
.
The device uses LTE services to improve voice communications.
Select the 2G, 3G, or 4G network
Tap
Preferred network type
.
Enable WLAN calling
1. Tap
WLAN calling
.