Hytera PNC460 - Use the Utility App; Iassistant

Apps
User Manual
56
3. Touch and hold a recording file, or select more recordings.
4. Do any of the following:
 To rename the file(s), tap to enter the name, and then tap SAVE.
 To share the file(s), tap , and then select a sharing method.
 To delete the file(s), tap , and then tap DELETE.
13.4 Use the Utility App
13.4.1 iAssistant
The iAssitant app allows you to control the device to audibly convey information or execute a task using voice
commands.
Only after authorization, you can use iAssistant. For details, contact your dealer.
1. Wake up iAssistant:
 Tap .
 If you have assigned the iAssistant Wakeup feature to the SK1, short press or long press the SK1 based on
the operation method you have set. For details, see 2.2 Programmable Key.
2. Ask the device to execute specific actions using the voice commands as follows:
No.
If You Want to…
Say…
1
Initiate PTT transmission
Start call
2
End PTT transmission
End call
3
Take a photo using the rear camera.
Take photo
4
Take a photo using the front camera.
Use front camera to take photo
5
Record a video using the rear camera
Record video
6
Record a video using the front camera
Use front camera to record video
7
Hear the location information
Broadcast location
8
Hear the current time, battery level, and signal
status
Broadcast status