1.
Tap .
2.
Adjust the value to low when taking a photo of a still object or in dim condition,
or to high when taking a phone of a moving object or in bright condition.
High ISO sensitivity indicates more image noise.
5.
Tap .
6.
(Optional) To view the photo, tap the circle in the lower left corner.
13.3.1.3 Set the Photo Parameters
In the
Camera
interface, tap , and then do any of the following:
General Parameters
To record the location when shooting the picture, tap following GPS location.
To enable face detection, tap following Face Detection.
To set the storage directory, tap Storage, and then select a path.
Still Camera Parameters
To enable countdown timer, tap Countdown timer, and then select a value.
To take multiple photos a time, tap following Continuous Shot.
To set picture size, tap Picture size, and then select a picture size.
To set picture quality, tap Picture quality, and then set the quality to Low, Standard, or High.
To set exposure, tap Exposure, and then select a value.
To select a white balance mode, tap White balance, and then select a mode.
To enable shutter sound, tap following Shutter Sound.
To set anti banding level, tap Anti Banding Level, and then select a value.
To reset camera settings, tap Restore defaults.
To Next Page
Loading...
