i-CAT FLX - Run Utilities; Scanner Shutdown

B-2
i-CAT FLX Installation Manual
032-0330-EN Rev K
Run Utilities
1. Select Acquire from the menu. Press to access Utilities menu.
Scanner Shutdown
Log out
1. Press . This button is accessible from Scheduled Exams or at the conclusion of the
scanning workflow.
2. On the logout confirmation dialog, press to close exam and log out. The log in screen
is displayed.
Power Off
The scanner and scanner controller are powered independently.
1. Power off scanner: press the OFF button on the operator control box. The
scanner shuts down and the POWER indicators on the operator control box and
scanner go OFF.
2. Power off scanner controller and touch screen: Press power button on the
touch screen to power off both the touch screen and scanner controller. On the
shutdown confirmation dialog, press to shutdown.
Viva Displays Varian Image Viewing and Acquisition application used with
the receptor panel.
Set Support URLs Set the webpage URLs for technical support and remote assistance for
the region of the world for the scanner.
Date and Time Change system date, time and time zone.
Option Description
PanelCal
ShutterCal
ChairCal
GeoCal
Refer to Calibration chapter.
QA Line Pair
QA Material
QA Air Water
QA Pan
Refer to QA Tests chapter.
Reprocess Exam Refer to i-CAT FLX User Manual.
Favorites Manager Refer to i-CAT FLX User Manual.
Roll-off Refer to i-CAT FLX Service Manual.