IBM 3500 - Page 43

Table 4. Power cord feature codes (continued)
Feature codes Description
END7 Power Cable - Drawer to IBM PDU (250V/10A)
C13/C20
6458 Power Cord 4.3 m (14 ft), Drawer to IBM PDU
(250V/10A) C13/C14
6671 Power Cord 2.7 m (9 ft), Drawer to IBM PDU (250V/
10A) C13/C14
6672 Power Cord 2M (6.5 ft), Drawer to IBM PDU,
250V/10A C13/C14
END0 Power Cord 2M (6.5 ft), Drawer to IBM PDU,
250V/10A C13/C14
END1 Power Cord 2.7 m (9 ft), Drawer to IBM PDU,
(250V/10A) C13/C14
END2 Power Cord 4.3m (14 ft), Drawer to IBM PDU,
(250V/10A) C13/C14
6665 Power Cable 2.8m (9.2 ft), Drawer to IBM PDU,
(250V/10A) C13/C20
ELC9 Power Cord 4.3m (14 ft), C13/C20 Drawer to IBM
PDU, (250V/10A) C13/C20
END5 Power Cord 2.8m (9.2 ft), Drawer to IBM PDU,
(250V/10A) C13/C20
END9 Power Cord 4.3m (14 ft), C13/C20 Drawer to IBM
PDU, (250V/10A) C13/C20
Attention: Ensure that sufcient power supply circuits are available to provide the total power
requirements of the equipment that is connected to each power supply circuit.
EMS node power planning
The following table lists the documentation that can be used as a reference while planning for power
requirements.
Table 5. Power planning reference information for Power9
For this information... Go to...
Planning for power for EMS node https://www.ibm.com/docs/en/power9?topic=shp-
planning-power-8
Determining your power requirements https://www.ibm.com/docs/en/power9?topic=pp-
determining-your-power-requirements-8
Server Information Form 3A https://www.ibm.com/docs/en/power9?
topic=dypr-server-information-form-3a-8
Workstation Information Form 3B https://www.ibm.com/docs/en/power9?
topic=dypr-workstation-information-form-3b-8
Plugs and receptacles https://www.ibm.com/docs/en/power9?topic=pp-
plugs-receptacles-8
Chapter 3. Planning for hardware27