Figure 20. Installation of left rear bracket
b) Press and hold the release catch and push the bracket into place so that the mounting screws can
be installed securely into the rack post holes.
c) Release the catch to secure the rail to the post once the screws are fully inserted.
d) Align the left front bracket mounting screws with the appropriate rack post holes in the front left
rack post. Ensure that the rail is level before you continue.
e) Secure the rear end of the left outer rail to the rack using the M5 shipping screw that comes with
the supplier rail kit.
Figure 21. Securing the rear end of the left outer rail
f) Remove the middle screw (as shown in the following gure) from the front end of the left outer rail
using a flat tip screwdriver.
Figure 22. Removal of the middle screw
g) Push and hold the release catch outward and insert the left front bracket mounting screws into the
left front rack post holes. Verify that the rail is level.
Chapter 4. Installing
45
To Next Page
Loading...
