Display Error Log
A screen similar to the following displays when you select this option. You can view or
clear your system error log.
.--------------------------------------------------------.
| Error Log |
||
||
| Date Time ErrorCode Location |
| Entry 1. 99/06/30 02:15:35 25a80011 U1.1-P1.1/Q1 |
| Entry 2. 99/07/01 03:18:36 20300026 U1.1-P1.1/Q1 |
`--------------------------------------------------------’
.-----------------. .-----------.
|C=Clear Error Log| |X=Exit Log |
`-----------------’ `-----------’
Note: The time stamp in this error log is Coordinated Universal Time (UCT), which is
also referred to as Greenwich Mean Time (GMT). The AIX error log has more
information available and time stamps with your local time.
Remote Initial Program Load Setup
This option allows you to enable and set up the remote startup of your system. You
must first specify the network parameters as shown in the following screen:
Network Parameters
1. IP Parameters
2. Adapter Parameters
3. Ping
.------.
|X=Exit|
`------’
===>
Note: Some applications may require that IP addresses contain leading zeroes for
numbers less than 100. For example, 129.132.4.20 may need to be entered as
129.132.004.020.
Chapter 8. Using System Management Services 417
To Next Page
Loading...