IBM 7026-H80 - RS/6000 - 256 MB RAM - Primary I;O Drawer Operator Panel Behavior During Power-On

Primary I/O Drawer Operator Panel Behavior During Power-On
After Connecting AC Power
Drawer State Power LED Drawer Operator Panel
Display
Standby Blinking slowly 8xxx checkpoints followed by
OK
System power On Blinking fast 9xxx checkpoints ending with
E1FF
Receive firmware command On solid Exxx checkpoints ending with
E105
Thereafter On solid 0xxx checkpoints ending with a
blank display
After Power is Removed Because of a Breakdown
Drawer State Power LED Drawer Operator Panel
Display
Standby Blinking slowly OK is displayed
System power On Blinking fast 9xxx checkpoints ending with
E1FF
Receive firmware command On solid Exxx checkpoints ending with
E105
Thereafter On solid 0xxx checkpoints ending with a
blank display
Critical error codes are posted on the top line (left-justified) of the drawer display with
the attention light on solid. Any location codes are posted on the bottom line
(left-justified).
Noncritical error codes are not posted. The drawer display remains blank with the
attention light on solid.
30 Service Guide