AIX and Physical Location Code Reference Tables
The following tables contain location codes that are used to identify functional units in
the system. Each of the following tables shows the locations for a physical part of the
system.
FRU Name Location Code AIX
Location
Code
Physical
Connection
Logical
Connection
CEC Drawer
CEC Drawer U1.1 00-00
CEC Backplane U1.1-P1 00-00
Processor Card U1.1-P1-C1 00-00 to
00-0A
Connector M03
Processor Card
Cache
U1.1-P1-C1 00-00
I/O Hub and
Interrupt Controller
U1.1-P1-C1 00-00
Regulator U1.1-P1-C1 00-00
Memory Controller U1.1-P1-C1 00-00
Memory DIMMs on
Processor Card
U1.1-P1-C1-M1 to
U1.1-P1-C1-M8
00-00 Refer to
“One-Way
Processor Card
Memory DIMM
Locations” on
page 22.
Memory Pair A on
Processor Card
U1.1-P1-C1-M1 x2 00-00 Refer to
“One-Way
Processor Card
Memory DIMM
Locations” on
page 22.
Memory Pair B on
Processor Card
U1.1-P1-C1-M2 x2 00-00 Refer to
“One-Way
Processor Card
Memory DIMM
Locations” on
page 22.
Memory Pair C on
Processor Card
U1.1-P1-C1-M3 x2 00-00 Refer to
“One-Way
Processor Card
Memory DIMM
Locations” on
page 22.
Memory Pair D on
Processor Card
U1.1-P1-C1-M4 x2 00-00 Refer to
“One-Way
Processor Card
Memory DIMM
Locations” on
page 22.
36 Service Guide
To Next Page
Loading...