6. Remove the memory DIMM by pushing the tabs out on the memory connectors.
Push Locking Tabs
Out to Release Memory
Module
1
2
1
Replacement
1. With one hand, touch any metal surface of the chassis to minimize static electrical
charges, and then pick up the memory DIMM.
2. Locate the memory DIMM connector on the memory card.
3. Insert the memory DIMM firmly into the connector.
Locking Tabs
4. Secure the memory DIMM with the locking tabs located at each end of the
connector.
5. Replace the memory card into the system unit.
442 Service Guide
To Next Page
Loading...