7014 Model T00 and T42 Rack
The mechanical packaging, cooling, power supply, and environmental requirements for
the rack are shown in the following table:
Dimensions
Height 1804 mm 71.0 in.
Capacity 36 EIA Units
With PDP - DC
only
1926 mm 75.8 in.
Width without
side panels
623 mm 24.5 in.
With side panels 644 mm 25.4 in.
Depth with rear
door
1042 mm 41.0 in.
RS/6000 T00 with
both doors
1098 mm 43.3 in.
pSeries T00 with
both doors
1147 mm 45.2 in.
Weight
Base Rack 244 kg 535 lbs
Full Rack¹ 816 kg 1795 lbs
.
Electrical² (sum specified values for
drawers or enclosures in rack)
DC Rack
Power source
loading maximum
in kVA³
8.4
AC Rack
Power source
loading maximum
in kVA (per PDB)⁴
4.8
Voltage range (V
ac)
200 to 240
Frequency (hertz) 50 or 60
Temperature
Requirements
(see specifications for drawers or enclosures)
Humidity
Requirements
(see specifications for drawers or enclosures)
Noise Emissions (see specifications for drawers or enclosures)
Clearances Front Back Left Right
Install/Air Flow Maintenance of a proper service clearance should allow proper air flow.
Service 915mm(36 in) 915mm(36 in) 915mm(36 in) 915mm(36 in)
60 Service Guide
To Next Page
Loading...