128 Chapter 8: Diagnosing and recovering from problems
201 Memory Error Make sure the system memory modules are installed correctly and securely.
For instructions on installing memory modules, see “Installing system memory
modules” on page 71.
229 External Cache Error If you have added any external cache modules, make sure they are installed
correctly and securely. For instructions on installing cache memory modules,
see “Installing cache memory modules” on page 69.
264 External Cache Size Error • If you have removed cache memory
from your computer, press Enter while
the error message is displayed. This starts the Setup Utility. See “Viewing
system information” on page 35 for information to help you verify that the
new cache memory size is correct.
• If you have not removed cache memory
from your computer, see the
HelpWare book for information on obtaining service.
30X Keyboard Error 1. Make sure the keyboard and mouse cables are correctly and securely
connected to the ports on the back of the tower.
The keyboard port has this symbol next to it:
The mouse port has this symbol next to it:
2. Make sure that a keyboard key or a mouse button is not being held down.
602 Diskette Boot Error Make sure the diskette has been formatted. If you don’t want to use the diskette
to boot (start) your computer, remove the diskette from the drive.
Table 7: Error codes, descriptions, and corrective actions
Error Code Description Here’s what to do:
Notes:
1. An X shown as part of the error code in this table represents any number between 0 and 9.
2. If any of these problems continue after taking the actions listed, see your online Aptiva Helper for information on running
diagnostics. If you need service, see the HelpWare book.
To Next Page
Loading...
Need help?
General
