Responding to error codes 129
662 Diskette Drive Configuration
Error
1. If you added or removed a diskette drive, press Enter while the error
message is displayed. This starts the Setup Utility. See “Changing disk drive
configuration” on page 35 for information to help you verify that the
diskette drive settings are correct. If the settings are not correct, change the
settings.
2. Make sure the diskette drive cables are connected correctly and securely.
See “Adding and removing drives” on page 84 for information to help you
check these connections.
762 Math Coprocessor
Configuration Error
See the HelpWare book for information on obtaining service.
962 Parallel Port Configuration
Error
If you installed or removed hardware, press Enter while the error message is
displayed. This starts the Setup Utility. See “Changing input/output port
configuration” on page 37 for information to help you verify that the parallel
port settings are correct. If the settings are not correct, change the settings.
1162 Serial Port Configuration
Error
If you installed or removed hardware, press Enter while the error message is
displayed. This starts the Setup Utility. See “Changing input/output port
configuration” on page 37 for information to help you verify that the serial port
settings are correct. If the settings are not correct, change the settings.
1762 Hard Disk Configuration Error 1. Make sure the cables to all drives in the tower are securely connected. See
“Adding and removing drives” on page 84 for information to help you
check these connections.
2. Press Enter while the error message is displayed. This starts the Setup
Utility. See “Changing disk drive configuration” on page 35 for information
to help you verify that the drive settings are correct. If the settings are not
correct, change the settings.
Table 7: Error codes, descriptions, and corrective actions
Error Code Description Here’s what to do:
Notes:
1. An X shown as part of the error code in this table represents any number between 0 and 9.
2. If any of these problems continue after taking the actions listed, see your online Aptiva Helper for information on running
diagnostics. If you need service, see the HelpWare book.
To Next Page
Loading...
Need help?
General
