Table 46. Upgrade error codes and recommended actions (continued)
Error
Code Explanation Action
01B9 Failed to check the Storwize V7000
version.
This could be caused by a number of
issues. Check Monitoring > Events under
both the block tab and the file tab on the
management GUI for an event that could
have caused this error and follow the
recommended action. If there is no
obvious event that could have caused
this error, refer to “File module to control
enclosure” on page 27.
01BA Unable to verify the correct
software version.
Contact your next level of support.
01BC Check the health of DDN storage
systems.
Contact your next level of support.
01BD Unable to update software
repository.
Contact your next level of support.
01BE Unable to distribute upgrade
callbacks.
Contact your next level of support.
01C0 Asynchronous replication is
running. Stop asynchronous
replication and continue with the
upgrade.
Stop asynchronous replication by typing
stoprepl gpfs0 --kill.
01C1 Asynchronous replication failed to
stop. Stop asynchronous replication
and continue with the upgrade.
Stop asynchronous replication by typing
stoprepl gpfs0 --kill.
01C2 Failed while checking for current
running asynchronous jobs.
Type lsrepl;echo $?. If the return code
is 0, start the upgrade again. If the return
code is any other number, contact your
next level of support.
01C3 Could not stop CTDB. Contact your next level of support.
01C5 Could not reinstall Lib_Utils. Contact your next level of support.
01C6 Failed while running
sonas_update_yum.
Contact your next level of support.
01C7 Unable to get list of system nodes. Contact your next level of support.
01C8 Failed while running cnrsscconfig. Contact your next level of support.
01C9 Unable to install CIM
configuration.
Contact your next level of support.
01CA Unable to get name of system. Contact your next level of support.
01CB Unable to install GPFS packages. Contact your next level of support.
01CC Could not install platform. Upgrade
on target system.
Contact your next level of support.
01CD Unable to mount GPFS file systems. See “Checking the GPFS file system
mount on each file module” on page 162.
01CF Unable to configure node. Contact your next level of support.
01D0 Unable to disable call home. Contact your next level of support.
01D1 Unable to enable call home. Contact your next level of support.
01D2 Failed to stop GPFS. Contact your next level of support.
270 Storwize V7000 Unified: Problem Determination Guide Version
To Next Page
Loading...
Need help?
General