80030012-2301xxxx Sensor [SensorElementName] has deasserted. (OS RealTime Mod)
Explanation: This message is for the use case when an implementation has detected a Sensor has deasserted.
May also be shown as 800300122301xxxx or 0x800300122301xxxx
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0509
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
80030108-1301xxxx Sensor [SensorElementName] has asserted. (PS Heavy Load)
Explanation: This message is for the use case when an implementation has detected a Sensor has asserted.
May also be shown as 800301081301xxxx or 0x800301081301xxxx
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0508
SNMP Trap ID:
Automatically notify Support: No
User response:
1. Replace the power supply with higher rated power.
2. Reduce the total power consumption by removing newly added or unused option like drives or adapters.
80070101-0c01xxxx Sensor [SensorElementName] has transitioned from normal to non-critical state. (Ambient
Status)
Explanation: This message is for the use case when an implementation has detected a Sensor transitioned to
non-critical from normal.
May also be shown as 800701010c01xxxx or 0x800701010c01xxxx
Severity: Warning
Alert Category: Warning - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0520
SNMP Trap ID: 12
Automatically notify Support: No
User response:
1. Check the microprocessor installed is Intel E5-2690.
2. Reduce the ambient temperature under 27 Celsius degree.
80030012-2301xxxx • 80070101-0c01xxxx
402
IBM System x3550 M4 Type 7914: Installation and Service Guide
To Next Page
Loading...
