IBM System x3550 M4 - Page 584

81070208-0a01xxxx Sensor [SensorElementName] has transitioned to a less severe state from critical. (PS 1 Therm
Fault)
Explanation: This message is for the use case when an implementation has detected a Sensor transition to less
severe from critical.
May also be shown as 810702080a01xxxx or 0x810702080a01xxxx
Severity: Info
Alert Category: Critical - Power
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0523
SNMP Trap ID: 4
Automatically notify Support: No
User response: No action; information only.
81070208-0a02xxxx Sensor [SensorElementName] has transitioned to a less severe state from critical. (PS 2 Therm
Fault)
Explanation: This message is for the use case when an implementation has detected a Sensor transition to less
severe from critical.
May also be shown as 810702080a02xxxx or 0x810702080a02xxxx
Severity: Info
Alert Category: Critical - Power
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0523
SNMP Trap ID: 4
Automatically notify Support: No
User response: No action; information only.
8107020f-2201xxxx Sensor [SensorElementName] has transitioned to a less severe state from critical. (TXT ACM
Module)
Explanation: This message is for the use case when an implementation has detected a Sensor transition to less
severe from critical.
May also be shown as 8107020f2201xxxx or 0x8107020f2201xxxx
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0523
SNMP Trap ID: 50
Automatically notify Support: No
User response: No action; information only.
81070208-0a01xxxx • 8107020f-2201xxxx
566
IBM System x3550 M4 Type 7914: Installation and Service Guide