IBM System x3550 M4 - Page 592

816f0008-0a01xxxx [PowerSupplyElementName] has been removed from container
[PhysicalPackageElementName]. (Power Supply 1)
Explanation: This message is for the use case when an implementation has detected a Power Supply has been
removed.
May also be shown as 816f00080a01xxxx or 0x816f00080a01xxxx
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0085
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
816f0008-0a02xxxx [PowerSupplyElementName] has been removed from container
[PhysicalPackageElementName]. (Power Supply 2)
Explanation: This message is for the use case when an implementation has detected a Power Supply has been
removed.
May also be shown as 816f00080a02xxxx or 0x816f00080a02xxxx
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0085
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
816f0009-1301xxxx [PowerSupplyElementName] has been turned on. (Host Power)
Explanation: This message is for the use case when an implementation has detected a Power Unit that has been
Enabled.
May also be shown as 816f00091301xxxx or 0x816f00091301xxxx
Severity: Info
Alert Category: System - Power On
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0107
SNMP Trap ID: 24
Automatically notify Support: No
User response: No action; information only.
816f0008-0a01xxxx • 816f0009-1301xxxx
574
IBM System x3550 M4 Type 7914: Installation and Service Guide