EasyManua.ls Logo

IBM System x3550 M4 - Page 609

IBM System x3550 M4
820 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
816f010d-0400xxxx The Drive [StorageVolumeElementName] has been enabled. (Drive 0)
Explanation: This message is for the use case when an implementation has detected a Drive was Enabled.
May also be shown as 816f010d0400xxxx or 0x816f010d0400xxxx
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0167
SNMP Trap ID: 5
Automatically notify Support: No
User response: No action; information only.
816f010d-0401xxxx The Drive [StorageVolumeElementName] has been enabled. (Drive 1)
Explanation: This message is for the use case when an implementation has detected a Drive was Enabled.
May also be shown as 816f010d0401xxxx or 0x816f010d0401xxxx
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0167
SNMP Trap ID: 5
Automatically notify Support: No
User response: No action; information only.
816f010d-0402xxxx The Drive [StorageVolumeElementName] has been enabled. (Drive 2)
Explanation: This message is for the use case when an implementation has detected a Drive was Enabled.
May also be shown as 816f010d0402xxxx or 0x816f010d0402xxxx
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0167
SNMP Trap ID: 5
Automatically notify Support: No
User response: No action; information only.
816f010d-0400xxxx 816f010d-0402xxxx
Appendix A. Integrated management module II (IMM2) error messages 591

Table of Contents

Other manuals for IBM System x3550 M4

Related product manuals