IBM System x3550 M4 - Page 634

816f040c-2015xxxx [PhysicalMemoryElementName] Enabled on Subsystem [MemoryElementName]. (DIMM 21)
Explanation: This message is for the use case when an implementation has detected that Memory has been Enabled.
May also be shown as 816f040c2015xxxx or 0x816f040c2015xxxx
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0130
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
816f040c-2016xxxx [PhysicalMemoryElementName] Enabled on Subsystem [MemoryElementName]. (DIMM 22)
Explanation: This message is for the use case when an implementation has detected that Memory has been Enabled.
May also be shown as 816f040c2016xxxx or 0x816f040c2016xxxx
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0130
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
816f040c-2017xxxx [PhysicalMemoryElementName] Enabled on Subsystem [MemoryElementName]. (DIMM 23)
Explanation: This message is for the use case when an implementation has detected that Memory has been Enabled.
May also be shown as 816f040c2017xxxx or 0x816f040c2017xxxx
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0130
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
816f040c-2015xxxx • 816f040c-2017xxxx
616
IBM System x3550 M4 Type 7914: Installation and Service Guide