816f050c-2007xxxx Memory Logging Limit Removed for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName]. (DIMM 7)
Explanation: This message is for the use case when an implementation has detected that the Memory Logging Limit
has been Removed.
May also be shown as 816f050c2007xxxx or 0x816f050c2007xxxx
Severity: Info
Alert Category: Warning - Memory
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0145
SNMP Trap ID: 43
Automatically notify Support: No
User response: No action; information only.
816f050c-2008xxxx Memory Logging Limit Removed for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName]. (DIMM 8)
Explanation: This message is for the use case when an implementation has detected that the Memory Logging Limit
has been Removed.
May also be shown as 816f050c2008xxxx or 0x816f050c2008xxxx
Severity: Info
Alert Category: Warning - Memory
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0145
SNMP Trap ID: 43
Automatically notify Support: No
User response: No action; information only.
816f050c-2009xxxx Memory Logging Limit Removed for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName]. (DIMM 9)
Explanation: This message is for the use case when an implementation has detected that the Memory Logging Limit
has been Removed.
May also be shown as 816f050c2009xxxx or 0x816f050c2009xxxx
Severity: Info
Alert Category: Warning - Memory
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0145
SNMP Trap ID: 43
Automatically notify Support: No
User response: No action; information only.
816f050c-2007xxxx • 816f050c-2009xxxx
Appendix A. Integrated management module II (IMM2) error messages 621
To Next Page
Loading...
