816f0608-1301xxxx [PowerSupplyElementName] Configuration is OK. (PS Configuration)
Explanation: This message is for the use case when an implementation when a Power Supply configuration is OK.
May also be shown as 816f06081301xxxx or 0x816f06081301xxxx
Severity: Info
Alert Category: Critical - Power
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0105
SNMP Trap ID: 4
Automatically notify Support: No
User response: No action; information only.
816f060d-0400xxxx Array in system [ComputerSystemElementName] has been restored. (Drive 0)
Explanation: This message is for the use case when an implementation has detected that a Failed Array has been
Restored.
May also be shown as 816f060d0400xxxx or 0x816f060d0400xxxx
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0177
SNMP Trap ID: 5
Automatically notify Support: No
User response: No action; information only.
816f060d-0401xxxx Array in system [ComputerSystemElementName] has been restored. (Drive 1)
Explanation: This message is for the use case when an implementation has detected that a Failed Array has been
Restored.
May also be shown as 816f060d0401xxxx or 0x816f060d0401xxxx
Severity: Info
Alert Category: Critical - Hard Disk drive
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0177
SNMP Trap ID: 5
Automatically notify Support: No
User response: No action; information only.
816f0608-1301xxxx • 816f060d-0401xxxx
Appendix A. Integrated management module II (IMM2) error messages 631
To Next Page
Loading...
