Hints, Tips and Limitations
OS/2
For OS/2 Warp:
Hibernation is not supported.
If you receive incoming faxes or mail under OS/2, you
must set the modem settings in the fax application to
one of the following:
Hardware FIFO enabled
Hardware Flow Control on
UART 16550A modem
In OS/2 FaxWorks for example, select Utilites, Set-
tings, Modem Type, and H/W FIFO (16650A).
If you do not set your modem to one of these settings,
you will not be able to receive an incoming fax.
DOS
WIN
3.1
For DOS and Windows 3.11:
Hibernation is not supported if OS/2 Boot Manager is
installed.
Using a PC Card with the Port Replicator
In the Windows NT, Windows 3.11 or DOS environment, you need to
install the PC Card support software after docking your computer to
the port replicator. If you have already installed the PC Card support
software, uninstall it and then reinstall it after you dock your com-
puter to the replicator.
Using the Network Feature in the Port Replicator
When you dock your computer to the ThinkPad Port Replicator with
Advanced Etherjet Feature, do as follows:
1. Click Start.
2. Move the cursor to Settings; then click Control Panel.
3. Double-click System.
4. Click the Device Manager tab.
5. Expand the Network adapters item by clicking it.
6. Double-click the Intel 8255X-based PCI Ethernet Adapter
(10/100) item.
Solving Computer Problems 105
To Next Page
Loading...
Need help?
General