Inserting a PC Card
Lower slot
Upper slot
Note: When an XJACK modem PC Card is in use, you might not
be able to connect an external microphone to the
microphone-in jack.
3. Press the PC Card firmly into the connector.
A window appears and informs you about the new card.
Note: If you have not installed the PC Card driver, Windows 98
starts "PCMCIA Card Services Wizard" to install it. Follow
the instructions on the screen.
You have completed setting up the PC Card, and you can now use
it. For more information on how to use the PC Card software, see
the
Online User's Guide
.
Removing the PC Card
Before removing a PC Card,
you must stop it
. Otherwise, the
system might freeze or data might be corrupted or lost.
1. Stop the card.
To stop the PC Card, find the PC Card icon on the right side of
the taskbar; then click the icon and click Stop. For more informa-
tion, see the
Online User's Guide
.
Note: The Stop option appears in gray when you are in
CardSoft mode or when the card is already stopped.
2. Press the PC Card eject button to pop out the button. Then
press it again until the PC Card pops out.
3. Remove the PC Card and store it safely for future use.
80
ThinkPad 390X User's Reference
To Next Page
Need help?
General
