EasyManuals Logo

IBM ThinkPad 390 User Manual

IBM ThinkPad 390
190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background image
Distinctive Functions of Your Computer
Changing the Startup Sequence
To change the startup sequence, do the following:
1. Press the up or down arrow keys to select the item to
change.
2. Press the + or keys to move the item up and down in the
priority list.
Note: If an item has a + sign before it, it means there are
sub-items in that category. Press the Enter key to
expand the item. Select a sub-item; then use the + or
keys to move the sub-item up and down in the pri-
ority list. Press the Enter key to collapse the item.
3. Repeat steps 1 and 2 for other items you want to change.
4. Press F10 and press Enter to exit from the BIOS Setup
Utility menu.
Your computer restarts.
To enable or disable a device in the startup sequence, do the
following:
1. Press the up or down arrow keys to select the item to
remove.
2. Hold down the Shift key and press the 1 key to enable or
disable the device.
3. Repeat steps 1 and 2 for other items you want to enable or
disable.
4. Press F10 and press Enter to exit from the BIOS Setup
Utility menu.
Your computer restarts.
32 ThinkPad 390X User's Reference

Table of Contents

Other manuals for IBM ThinkPad 390

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBM ThinkPad 390 and is the answer not in the manual?

IBM ThinkPad 390 Specifications

General IconGeneral
ProcessorIntel Pentium II
RAM32 MB - 256 MB
Display14.1" TFT
Operating SystemWindows 98
Weight3.1 kg
Optical Drive24x CD-ROM
BatteryLithium-Ion
PortsUSB, Parallel, Serial, VGA
Network56K Modem, Ethernet
Expansion SlotsPC Card

Related product manuals