Upgrading the Hard Disk Drive
Replacing the UltraBay FX Device
You can install the following drives and devices in the UltraBay FX:
CD-ROM drive/diskette drive
DVD-ROM drive/diskette drive
Second battery pack
Second hard disk drive
Note: UltraBay FX device options can be purchased through your
IBM reseller or IBM marketing representative.
Swapping UltraBay FX Devices
You can warm swap the CD-ROM drive/diskette drive and
DVD-ROM drive/diskette drive into and out of the UltraBay FX.
Warm swap means to remove or reconnect a device when the
computer is in suspend mode. Warm swap is only available
under the Windows 98 or Windows 95 OSR2 operating system;
otherwise, turn off your computer before swapping the CD-ROM
drive/diskette drive and DVD-ROM drive/diskette drive.
Under the Windows 98 or Windows OSR2 operating system, you
can warm swap the battery pack when the AC Adapter supplies
the computer with power. Otherwise, you can hot swap the
battery pack when the AC Adapter supplies the computer with
power.
To swap a second hard disk drive, you need to power off the
computer.
Note: Do not swap UltraBay FX devices if the computer is in
hibernation mode.
To swap UltraBay FX devices, do the following:
1. Save your work.
2. Prepare the computer and UltraBay FX for swap.
Extending the Features of Your Computer 59
To Next Page
Loading...
Need help?
General