Using a Port Replicator
WIN
98
WIN
95
You can dock or undock the computer while the com-
puter is in suspend mode (warm dock)
or
when the
computer power is turned off. For example, when
undocking the computer, you have the following
alternatives:
Select Eject PC in the Start menu (suspend
mode).
or:
Press the Eject Request button of the port
replicator (suspend mode).
or:
Power off the computer and close the LCD.
Note: Warm dock is only available under the
Windows 98 or Windows 95 OSR2 oper-
ating system.
Do not dock or undock the computer when the
computer is in hibernation mode.
WIN
NT
You can dock or undock the computer only when the
computer power is turned off.
Power off the computer and close the LCD.
Note:
If the power-on indicator of the computer or the port replicator
does not turn on, press Fn.
Enabling the CardBus Sockets on the ThinkPad Port
Replicator with Advanced Etherjet Feature (for Windows 98)
The ThinkPad Port Replicator with Advanced Etherjet Feature might
not function properly if you attach a computer to it that is in suspend
mode. In such a case, enable the CardBus sockets as follows:
1. Click Start.
2. Move the cursor to Settings, and then click Control Panel.
3. Double-click System.
4. Click Device Manager and double-click PCMCIA socket. If the
CardBus sockets are not enabled, you see two CardBus con-
troller lines (Texas Instruments PCI-1250 CardBus Controller,
Extending the Features of Your Computer 83
To Next Page
Need help?
General