Attaching a Printer
Inserting a PC Card
This section describes how to prepare to use a PC Card.
Your computer has two PC Card slots (upper slot and lower slot) and
supports the following types of cards:
PC Card (Type I, Type II, and Type III)
CardBus
Zoomed Video (ZV)
To install a PC Card in your computer, do the following:
1. Find the notched edge (1) of the PC Card as shown.
1
2. Insert the PC Card into the appropriate slot according to your PC
Card type.
If you are using a PC Card with an XJACK** connector,
insert it into the upper slot.
If you are using a Type I or Type II PC Card, insert it into
either the upper slot or the lower slot.
If you are using a Type III PC Card, insert it into the lower
slot.
Extending the Features of Your Computer 79
To Next Page
Loading...
