Distinctive Functions of Your Computer
IBM BIOS Setup Utility
+Removable Devices
ATAPI CD-ROM Drive
+Hard Drive
Network Boot
Power On Item Specific Help
F1 Help Select Item Space/- Change Value F9 Setup Defaults
F3/ESC Exit Select Menu Enter Select > Sub-Menu F10 Save and Exit
↑↓
↔
The "Power On" submenu is used to change the startup sequence of
drives in your computer. For example, if you have different operating
systems on different replacement hard disk drives or CD-ROM, you
can have the system boot up from one of these devices.
Note: The ThinkPad 390X computer supports a second hard disk
drive option which can be installed in the UltraBay FX. The
second hard disk drive option can be purchased through your
IBM reseller or IBM marketing representative.
Attention: You must be extremely careful not to specify a wrong
device during a copy, save, or a format operation after you change
your startup sequence. If you specify a wrong device, your data and
programs might be erased or overwritten.
Network
Selecting the Network item and pressing Enter displays the fol-
lowing "Network" submenu.
30
ThinkPad 390X User's Reference
To Next Page
Loading...
Need help?
General