23
Figure 4-19 Sample Read Fault Codes Screen 2
– tap this icon to view the information of the freeze frame.
Figure 4-20 Sample Read Fault Codes Screen 3
Clear Fault Codes
After reading the retrieved codes from the vehicle and certain repairs have
been carried out, you can erase the codes from the vehicle using this function.
Before performing this function, make sure the vehicle’s ignition key is in the ON
(RUN) position with the engine off.
To erase codes
1) Select the [Clear fault code] on the "function menu"
2) At this time, a warning message will appear on the screen, indicating
that the fault code and frozen data information will be cleared.
To Next Page
Loading...
