32
5 Service Operations
The Service section is specially designed to provide you with quick access
to the vehicle systems for various scheduled service and maintenance
performances. The typical service operation screen is a series of menu driven
executive commands. By following the on-screen instructions to select
appropriate execution options, enter correct values or data, and perform
necessary actions, the system will guide you through the complete performance
for various service operations.
The most commonly performed service functions include:
1. ABS Bleeding (BLD) Service
2. Oil Reset (OIL) Service
3. Electronic Parking Brake (EPB) Service
4. Electronic Throttle Control (ETC) Service
5. Injector Coding (INJ) Service
6. Steering Angle Sensor (SAS) Service
7. Battery Management System (BMS) Service
8. Diesel Particulate Filter (DPF) Service
9. Tire Pressure Monitor System (TPMS) service
Figure 5-1 Sample Service Function List
After entering each special function, the screen will display the Vehicle
Manufacturer, you need to make a step-by-step selection according to your test
vehicle.
5.1 ABS Bleeding (BLD) Service
When the ABS contains air, or the ABS computer / ABS pump / brake
master cylinder / brake cylinder/ brake fluid is replaced, the ABS bleeding
function must be performed to bleed the brake system to restore ABS brake
To Next Page
Loading...
