50
Figure 5-30 Sample SAS Function Screen 4
8. The system will enter communication, until the application
program is completed. Tap OK to exit.
Figure 5-31 Sample SAS Function Screen 5
5.7 Battery Management System (BMS) Service
The BMS (Battery Management System) allows the scan tool to evaluate
the battery charge state, monitor the close-circuit current, register the battery
replacement, and activate the rest state of the vehicle.
NOTE
1) This function is not supported by all vehicles. The screens shown in this
section are examples.
2) The sub functions and actual test screens of the BMS may vary by vehicle.
To Next Page
Loading...
