42
Figure 5-18 Sample EPB Function Screen 5
5.4 Electronic Throttle Control (ETC) Service
Electronic Throttle Control system (ETC), relearns the throttle value control
value while clear or replace the throttle value.
Using Benz as an example
ļ To perform Throttle functions
1. Tap the Service application button from the CR Genius Job Menu.
2. Tap Throttle icon and wait for the vehicle manufacturer screen.
Then tap Benz icon from the screen. Waiting for vehicle
communication.
3. You can tap Auto Identify to acquire vehicle VIN information and
tap OK to confirm. Or you can tap the Vehicle Select to choose
the correct vehicle according to the on-screen instructions. See
Vehicle Identification on section 4.2 for detail.
4. Tap the needed service in the Throttle function list. The list may
vary by vehicle. Learn the throttle valve stop point value. Select
the "teach in of throttle valve stop" option in the function list. Turn
on the vehicle ignition.
To Next Page
Loading...
