Icom IC-910H - Page 11

9
2
PANEL DESCRIPTION
#4 SUB•SUB OFF SWITCH [SUB•SUB OFF]
➥ Push to enable the SUB band control
from the tuning dial, keypad, etc. (p. 19)
  •“SUB”indicatorappears.
For 1 sec.
➥ Push for 1 sec. to turn the SUB band
readout indication ON and OFF. (p. 24)
#5 CALL•TONE SQUELCH SWITCH [CALL•T-SQL]
➥ Push to select the call channel of the op-
erating band. The call channel can be
selected from both the VFO and memory
mode operation. (p. 43)
For 1 sec.
➥ Push for 1 sec. to turn the tone squelch
function ON and OFF during FM mode
operation. (p. 30)
  •“T-SQL” indicator appears when the tone
squelch is activated.