EasyManua.ls Logo

Icom IC-910H - 14 Specifications

Icom IC-910H
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
• General
•Frequencycoverage : (Unit:MHz)
*
1
Optional UX-910
*
2
Guaranteed range is 144.0–148.0 MHz.
*
3
Guaranteed range is 430.0–450.0 MHz.
*
4
Guaranteed range is 1240.0–1300.0 MHz.
•Mode :USB,LSB,CW,FM,FM-N*
*Not available in 1200 MHz
•No.ofmemoryCh. :212(99 regular, 6 scan edges,
1 calls for each band)
plus 10
satellite memories)
•Antennaconnector :SO-239(50 Ω; VHF)
Type-N (50 Ω; UHF)
•Usabletemp.range :–10˚Cto+60˚C;
+14˚Fto+140˚F
•Frequencystability :Lessthan±3ppm
(–10to60˚C;+14to+140˚F)
•Frequencyresolution :1Hzminimum
•Powersupply :13.8VDC±15%
(negative ground)
•Currentdrain(at 13.8 V DC; approx.):
Transmit Max. power 23.0 A
Receive Standby 2.0 A (3.0 A; UX-910)
Max. audio 2.5 A (3.5 A; UX-910)
•Dimensions :241(W) × 94(H) × 239(D) mm
(projections not included)
9
1
2(W) × 3
11
16(H) × 9
13
32(D) in
•Weight(approx.) :4.5kg;10lb
(5.35 kg; 11 lb 13 oz w/UX-910)
•ACC1connector :8-pinDINconnector
•CI-Vconnector :2-conductor3.5(d)mm(
1
8)
•DATAconnectors :6-pinminiDIN× 2
(for MAIN and SUB)
Transmitter
•Outputpower(continuously adjustable):
144 MHz 5–100 W
430(440) MHz 5–75 W
1200 MHz 1–10 W (optional UX-910)
•Modulationsystem :
SSB Balanced modulation
FM
Variable reactance modulation
•Spuriousemission :
144/430(440) MHz More than 60 dB
1200 MHz More than 50 dB
•Carriersuppression :Morethan40dB
•Unwantedsideband :Morethan40dB
suppression
•
Microphone connector
:8-pinconnector(600Ω)
•KEYconnector :3-conductor3.5(d)mm(
1
4)
• Receiver
•Receivesystem :
VHF SSB, CW
Single conversion superheterodyne
FM
Double conversion superheterodyne
UHF SSB, CW
Double conversion superheterodyne
FM Triple conversion superheterodyne
•Intermediatefrequencies: (Unit:MHz)
•Sensitivity :
SSB, CW (10 dB S/N)Lessthan0.11µV
FM (12 dB SINAD) Lessthan0.18µV
•Squelchsensitivity(threshold):
SSB,CW Lessthan1.0µV
FM Lessthan0.18µV
•Selectivity :
SSB, CW More than 2.3 kHz/–6 dB
Less than 4.2 kHz/–60 dB*
FM More than 15.0 kHz/–6 dB
Less than 30.0 kHz/–60 dB*
FM-N More than 6.0 kHz/–6 dB
Less than 18.0 kHz/–36 dB
CW-N More than 0.5 kHz/–6 dB
(w/FL-132 or FL-133) Less than 1.34 kHz/–60 dB*
*Except 1200 MHz band
•Spuriousandimagerejectionratio:
144/430(440) MHz More than 60 dB
1200 MHz More than 50 dB
•AFoutputpower :Morethan2.0Wat10%
(at 13.8 V DC) distortion with an 8 Ω load
•RITvariablerange :
144/430(440)MHz ±1.0kHz(SSB, CW)
±5.0kHz(FM)
1200MHz ±2.0kHz(SSB, CW)
±10.0kHz(FM)
•
IF SHIFT variable range
:Morethan±1.2kHz
•PHONESconnector :3-conductor6.35(d)mm(
1
4)
•Ext.SPconnectors :2-conductor3.5(d)mm(
1
8)
/8 Ω × 2 (for MAIN and SUB)
14
80
SPECIFICATIONS
All stated specications are typical and subject to
change without notice or obligation.
Version
144 MHz 430(440) MHz 1200 MHz*
1
U.S.A.
Tx:144.0–148.0 Tx:430.0–450.0 Tx:1240.0–1300.0
Rx:136.0–174.0*
2
Rx:420.0–480.0*
3
Rx:1240.0–1320.0*
4
Europe 144.0–146.0 430.0–440.0
1240.0–1300.0
Australia
144.0–148.0 430.0–450.0
1240.0–1300.0
Sweden
144.0–146.0 432.0–438.0
1240.0–1300.0
Italy 144.0–146.0
430.0–434.0
1240.0–1245.0
435.0–438.0
1270.0–1298.0
MAIN BAND SUB BAND
1st 2nd 3rd 1st 2nd 3rd
SSB
10.8500
10.9500
CW
10.8491
10.9491
FM
10.8500
0.455
10.9500
0.455
SSB
71.2500
10.8500
71.3500 10.9500
CW
71.2491
10.8491
71.3491 10.9491
FM
71.2500
10.8500
0.455
71.3500 10.9500
0.455
SSB
243.8500
10.8500
243.9500
10.9500
CW
243.8491
10.8491
243.9491
10.9491
FM
243.8500
10.8500
0.455
243.9500
10.9500
0.455
144 MHz
430(440) MHz
1200 MHz

Table of Contents

Other manuals for Icom IC-910H

Related product manuals