Icom IC-910H - Dial Lock Function; Basic Operation

25
4
BASIC OPERATION
D SUB tuning dial assignment
q Push [SET] then [RIT] to enter the RIT/SHIFT set
mode.
w Push [DN Z] or [Y UP] to select [RIT] or [SHIFT]
control to be assigned.
 •“ritnob”or“SFtnob”appears.
e Rotate the tuning dial to select the condition as de-
scribed below.
 •Pushing[M-CL5]for1sec.selectsthedefaultsetting.
r Push [SET] to exit from the RIT/SHIFT set mode.
[SET] [DN Z][Y UP]
[RIT]
[RIT]
[SHIFT]
The [RIT] control functions as [RIT]
even when the SUB tuning dial
function is in use. (default)
The [RIT] control can be used for
MAIN band tuning.
The [RIT] control can be used for
SUB band tuning.
The [RIT] control can be used for
SUB band IF shift control.
The [SHIFT] control functions as
[SHIFT] even when the SUB tuning
dial function is in use. (default)
The [SHIFT] control can be used for
SUB band IF shift control.
The [SHIFT] control can be used for
MAIN band tuning.
The [SHIFT] control can be used for
SUB band tuning.
n Dial lock function
The dial lock function prevents accidental changes
caused by the tuning dial (including the SUB tuning dial
function).
➥Push[SPCH•LOCK]for1sec.toturnthediallock
function ON and OFF.
 •“LOCK”indicatorappearswhilethediallockfunctionis
activated.
[SPCH•LOCK] for 1 sec.
F
M
VFO A
VF
O
A
F M
L OCK
S 1 3
5
7
9 20
40
60dB
60dB
S
1
3 5
7
9
20
40
LOCK indicatior